Vinyl Downspout End caps size 2×3″- N.F.T system/Kratky method Hydroponics DIY (3 in x 3 out)
$20.00
Price: $20.00
(as of Jan 29, 2024 17:48:43 UTC – Details)
๐ฟ Hydroponic N.F.T/Kratky ๐ฟ – 3D Printed Downspout Endcap Set
Are you passionate about growing your fresh greens like lettuce, basil, parsley, or thyme๐ฅ?
If you’re interested in hydroponics, the N.F.T. (Nutrient Film Technique) system or the Kratky method are excellent choices to kickstart your journey.
๐ฅฌ Start cultivating your own fresh and flavorful greens today!๐ฅฌ
The caps fit to corresponding Vinyl Downspout(2×3″) from Homedepot or Lowes
โ ๏ธ Attention โ ๏ธ
Silicone inside the perimeter of the end caps or the Vinyl downspout is a must! To achieve the best results, let the silicone cure for a full 24 hours before adding water to your hydroponic setup. This curing time allows the silicone to form a strong bond, enhancing its waterproof properties and ensuring a long-lasting seal.
1/2″ output was tested with many different fittings, and I found that some of them fit perfectly, and some of them are a little bit loose, that’s why in some cases you would need to apply silicone or Sealant/Teflon Tape to seal the connection.
The package includes JUST the end caps. The vinyl downspout and the silicon are NOT included.
Date First Available โ : โ October 7, 2023
ASIN โ : โ B0CKJYDJFP
Made from PETG plastic, they are fully recyclable, making them an environmentally responsible choice for your hydroponic setup. When you are ready to replace them, you can do so sustainably, knowing that they can be recycled and repurposed.
Enjoy hassle-free assembly, efficient sealing, and the assurance of using high-quality material for your hydroponic NFT system.
Downspout endcaps blind(no holes)
Downspout endcaps with 1/2″ elbow exit
Downspout endcaps for 1/2″ PVC pipe insert
There are no reviews yet.