THIKPO Universal Fuel Injector Tester and DIY Cleaning Tool Kit, 8 Pulse Modes, 4 Wire Dual Channel for 2 Fuel Injectors, 4 Size Cleaning Adapters, 12V/5V Output Power

Price: $31.99
(as of Jan 27, 2024 15:46:39 UTC – Details)

Product Description

UPGRADED UNIVERSAL FUEL INJECTOR TESTER AND CLEANER KIT

TEST 2 INJECTORS SIMULTANEOUSLY— Our THIKPO fuel injector tester has two pairs of pulse output terminals (test leads), which can test two fuel injectors at the same time for comparison while some brand which has one pair of pulse output terminals can only test one injector.

8 PULSE MODES & MODE LOCK FEATURE— Designed with 8 pulse modes, help you diagnose and clean injectors, and easily identify common faults such as stuck, blocked, leaked, or burnt-out conditions of the fuel injector. Its mode lock feature ensures test condition uniformity.

4 SIZE CLEANING ADAPTERS & UNIVERSAL FOR MOST INJECTORS— Come with 4 different size adapters, this injector cleaner is compatible with 12V injectors of almost all vehicle models, for both EFI and GDI injectors. Clean the injectors effectively for you.

PROTECTION SYSTEMS— Designed with power input reverse connection protection and output short circuit protection function. When the fuel injector is damaged or short circuit of the pulse output terminal, the power indicator light will flash to prompt you. Ensure the working is safe and make the injector get effective testing and complete cleaning.

4 Size Fuel Injector Cleaner Adapters

Once an injector becomes clogged and the spray pattern changes from mist to stream, the injector must be replaced or cleaned.

Replacing fuel injectors can be difficult and is always expensive. Cleaning is a good option when the injectors are clogged.

The 4 size cleaning adapters included are for DIY cleaning of fuel injector nozzles removed from the engine, which can improve your engine’s performance and save your budget.

Small and Large Size Adapters: Compatible with fuel injectors on most vehicles.Medium Size Adapter: Compatible with VW and Audi vehicles.Adapter with Threaded Hole: Compatible with BMW N series vehicles.

CAUTION: It requires a combination of 12V DC power (not included) and an injector cleaner aerosol (not included). Please prepare these necessary tools before cleaning work.

High Efficient and Wide Application Diagnosing Cleaning for Fuel Injector

8 Pulse Modes (Mode 1 – Mode 8)

Mode 0: Standby, no output

Mode 1 / Mode 5, Single Pulse Low Power/High Power: The Injector Tester will emit a pulse with an approximate pulse width of 255 ms.

Mode 2 / Mode 6, Short Pulse Low Power/High Power: The injector tester will emit 50 pulses with a pulse width of approximately 7 ms.

Mode 3 / Mode 7, Long Pulse Low Power/High Power: The injector tester will emit 100 pulses with a pulse width of approximately 3.5 milliseconds.

Mode 4/Mode 8, Continuous Pulse Low Power/High Power : The Injector Tester will continuously output pulses at a rate of approximately 50 pulses every 1450 ms with a pulse width of approximately 7 ms.

NOTE: During pulse output, the MODE SET button is locked, please press the PULSE button again to terminate output and then the MODE SET button is unlocked, and you can set the mode again.

Product Details

Two Pairs of Pulse Output Terminals: Use one pair of pulse output terminals to test each injector individually, or use two pairs of pulse output terminals to test two injectors simultaneously.Extra Long Power Wire: Up to 40inch for convenient testing. The wires are made of superior silica gel, allowing the tester to work at high and low temperatures.Power Wire Clips: Positive and negative strong clips of power wire, reinforced processing, not easy to fall off and deform.DC Input Port: Powered by a 12V battery or DC12V (2A recommended) power adapter.

Specifications

Power supply : 12V battery or DC 12V (recommended 2A) power adapterWorking conditions: 0°C-40°C; relative humidity ≤80%Storage conditions: -20°C-50°C; relative humidity ≤85%Unit Size: 4.70*3.14*0.98 inchesWeight: 0.75 lb

Easy to Operate the Fuel Injector Tester

1. Turn off the vehicle engine.

2. Unplug the injector wires of the vehicle to be tested, and then connect a pair or two pairs of the pulse output terminals to the vehicle injectors. (The red pulse output terminal is connected to the positive terminal of the injector and the black pulse output terminal is connected to the negative terminal of the injector.)

3. Then connect the red clip of the injector tester to the positive terminal of the 12V car battery and the black clip of the injector tester to the negative terminal of the battery.

4. Insert the DC plug into the power input port of the injector tester.

5. Press the MODE SET key to switch the desired pulse signal output modes, and the screen will display the currently selected mode.

6. After selecting the desired pulse signal output mode, press the “PULSE” key, the tester will output a pulse signal to the injector of the car to be tested, and the signal indicator will light up when the pulse signal is output.

7. If you need to repeat the test in the same mode, you can press the “PULSE” button again.

The MODE SET button is used to switch modes, but during pulsing it will be locked and you need to press the PULSE button again to terminate the pulsing output, then the MODE SET button is unlocked.

NOTE

1. Before using this injector cleaner, the vehicle engine must be turned off.

2. It is recommended that you wear goggles or take other measures to avoid splashing on eyes and skin surfaces.

3. Use this Injector Cleaner only in a ventilated area to avoid inhaling exhaust fumes and vapors emitted from the vehicle.

4. Do not short-circuit the positive and negative terminals of the vehicle battery.

5. Do not smoke or light a fire in the vicinity of the vehicle.

6. Do not spill automotive fuel on hot engine parts.

7. Do not get close to any rotating (or moving) parts of the vehicle and do not touch any hot parts of the vehicle.

8. Do not touch any part of the automobile that carries a dangerous voltage.

Package Dimensions ‏ : ‎ 6.69 x 5.51 x 2.6 inches; 13.76 Ounces
Item model number ‏ : ‎ TK-F4
Date First Available ‏ : ‎ December 23, 2023
Manufacturer ‏ : ‎ THIKPO
ASIN ‏ : ‎ B0CNH5P66F
Country of Origin ‏ : ‎ China

Upgraded Universal Fuel Injector Tester and Cleaner Kit—Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection, such as blockage, leakage, damage, and burnout of the injectors. The included 4-size cleaning adapters combined with the tester pulse mode can quickly clean the injectors.
【8 Pulse Modes & LCD Display】The tester kit is designed with 8 pulse modes, which are composed of 4 pulse signal output modes and 2 output voltage levels: Short/ Medium/ Long/ Continuous pulse modes + High/Low(12V/5V) power drive modes. This tester has a wide variety of pulse modes, providing a large testing space to accurately and quickly diagnose and repair petrol vehicle injectors’ fuel delivery problems. The LCD displays the mode you are in.
【Test 2 Injectors Simultaneously & Ultra-long Power Cord】Come with two pairs of output terminals, allowing you to test two injectors or one injector at once. The fuel injector tester power cord is up to 40inch and the test lead is up to 20 inches for convenient testing. The wires are made of superior silica gel, allowing the tester to work at high and low temperatures. （To make it perform better, it is recommended to work at normal temperatures.）
【4 Size Adapters Cleaning Tool & Universal Fit】Our injector cleaner small and large size adapters are compatible with most 12V EFI and GDI vehicle models’ injectors. We also offer two additional specialized adapters for the BMW Audi, one is suitable for models such as V.W, Audi, etc. and another one with threaded hole is exclusively for BMW N series such as N14/N18/N20/N26/N53/N54/N55/N63/S63.
【Polarity Reverse Connection Protection & Short Circuit Protection】Deigned with power input reverse connection protection and output short circuit protection function. In the case of a damaged fuel injector or a short circuit of the pulse output terminal, the power indicator light of the fuel injector cleaner tool will flash to prompt you.
【Power supply method】Powered by a 12V battery or an external DC 12V (at least 1.5A) power adapter. and it can work with any fuel pressure tester(NOTE: Gasoline car only, NOT the diesel engine). Warmly Note: Using this fuel injector cleaning tool to clean requires a carburetor cleaner or injector aerosol (not included) and a 12V DC battery power supply (not included). Please prepare these necessary tools before your cleaning.
【Professional Services Online & 3-Year Warranty】Our technicians and customer support are online to answer your questions to provide professional guidance, and refunds or exchanges without worry. We promise 3 years warranty.