iPower 6 Inch Air Cooled Reflector Hood and 1000W Digital Dimmable Electronic Ballast 8 Feet Rope Hanger Combo Set for Hydroponic, HPS/MH Grow Light System

Price: $215.99
(as of Feb 05, 2024 22:45:33 UTC – Details)

iPower 6” Air Cooled Grow Light Reflector Hood

When maximizing growing area is a priority, the iPower Air Cooled Hood not only provides large reflecting surface, but also effective cooling with the help of fans, filters, and silencers.

Highly Reflective German Aluminum

This reflector painted white panels with 0.4mm highly 95% reflective textured German aluminum, can intensify light and enlarge lighting area.

Note: Coverage depends on fixture height and wattage.

Specifications:
1. Maximum Wattage: 1000W
2. 15 feet built-in heavy duty cord
3. Standard hydroponics S-plug
4. Socket: Ceramic Mogul E39
5. Pre-installed lamp socket
6. Fan, filter and duct supported
7. Completely sealed with gaskets
8. V-Hanger hooks included
9. 1500W High Temperature Ceramic Socket
10. Removable slide-in glass with gasket

iPower Digital Dimmable Electronic Ballast for HPS & MH Grow Light System

The iPower’s high operating frequency not only ensures continuous power delivery, but also has conserving bulb life in mind. As efficient and powerful as the iPower is, its silent operation and light weight design adds to the maximum lumen any plant will ever need. This iPower Digital Ballast features:
High power factor
High luminous efficiency
Adjustable wattage output
Zero acoustic resonance
Internal RF protection
Internal Resin coating for long life
Convertibility between HPS and MH lightbulbs
Conveniently wired with standard hydroponic “S” plug
Stable light output by constant lamp voltage, lamps will be flicker free.
Anodized aluminum fins for maximized heat dissipation
Sunlight Supply (Brand S) style output plug (Hydro farm fixtures will need BAASP adapters)

Each Ballast Comes with:
1x Dimmable digital ballast
1x Heavy duty power cord (a $10 value FREE from us)
1x Operating manual

Specifications:
Operating Temperature: -40¡æ~ 65¡æ
Operating Voltage Range: 100V ~ 265V
Power Supply Frequency: 47 ~ 63 Hz
Operating Frequency: 25~100 kHz
Power Factor: > 0.99
Total Harmonic Distortion (THD): <10%
Crest Factor: <1.7
Dimmable Power Levels: 50%, 75%, 100%
Dimming Control: knob

Protections:
Open & Short Circuit Protection
Ignition Failure Protection
Overheating Protection
End-of-Bulb-Life Protection

iPower Grow Lights Adjustable Ratchet Hangers

This reflector suspension system enables you to raise and lower the light in one simple movement. With tension mechanism, the hood will stay in place once set at the desired height. Easily raise your lights when you are doing your routine work in the room, and just pull them down when you leave. It allows you to adjust the height of the hood as plants grow.

Features:
w/nickel plated cast iron gears
150 pounds handling capacity
8 feet long
Attaching the Ratchet

Height Adjustment:
Adjust to the desired height by simply pulling the loose rope end. To release, hold the loose rope end and depress the lever recessed in the Light Hanger
Specification: 23 x 17 x 9 in; up to 4’ x 4’ light coverage; fits for 250W, 400W, 600W, 1000W HPS/ MH grow light system. Built-in 15 feet heavy duty lamp cord with E39 ceramic mogul socket and standard hydroponic s-plug
Air Cooled Reflector Hood: 6-inch Air Duct ensure air passes easily through both ends of the reflector for maximum inline air cooling and protect your plants from excessive heat
Digital Dimmable Electronic Ballast: Support Dual Voltage Input 120V/240V; Dimmable Options: 50%, 75%, 100%; High frequency output results in less power loss, 30% more lumens than magnetic ballasts for improved yields
Rope Hanger: 1/8 Inch 8 feet length braided polypropylene rope. 4 easy-to-use carabiner clips. Fully adjustable and locking; tear & rust resistant; for multipurpose use. Up to 75-pound weight load capacity per ratchet
Package Includes: 1 x 6 Inch Air Cooled Reflector Hood; 1 x 1000W Digital Dimmable Electronic Ballast; 1-Pair 1/8 inches 8 feet long Rope Hanger