Digital Salinity Tester pH/TDS Tester for Drinking Water Pool Salt Meter Replacement for pH Strip Tester for Saltwater Aquarium Swimming Pools Hot Tubs and Spas, Hydroponics…

Price: $32.00
(as of Feb 18, 2024 06:08:12 UTC – Details)

Product Description

According to the US EPA drinking water standard recommends that the pH range of drinking water is 6.5~8.5, and the TDS of drinking water should be controlled below 500ppm. 𝐖𝐡𝐲 𝐒𝐡𝐨𝐮𝐥𝐝 We 𝐌𝐞𝐚𝐬𝐮𝐫𝐞 𝐓𝐃𝐒 𝐚𝐧𝐝 𝐏𝐇 𝐋𝐞𝐯𝐞𝐥𝐬? TDS and pH level change the texture and taste, making the water unfit for consumption. Q: What is the best TDS level for drinking water? A: Generally speaking , the TDS level between 50-500ppm is considered as the most suitable and acceptable. TDS levels below 50 can be considered high-quality drinking water.

TDS Meter and pH Meter

TDS are the amount of organic and inorganic materials, such as metals, minerals, and salts, dissolved in a particular volume of water; TDS is essentially a measure of anything dissolved in water that is not an H2O molecule.It measures as parts per million (ppm). According to the EPA secondary drinking water regulations, 500 ppm is the recommended as an extremely maximum amount of TDS for your drinking water. Any measurement higher than 1000 ppm is an unsafe level of TDS. If the level exceeds 2000 ppm, then a filtration system may be unable to properly filter TDS.TDS parameter：Range: 0-10000 ppm, 10.1- 200.0 ppt (Convert range automatically)

Resolution: 1ppm; 0.1ppt

Accuracy: ±2% F.S.

The PH of drinking water and food will affect physical health of human when it is testing to be acidic or alkaline .Temperature can affect the data of PH, this type of water meter would be automatically making compensation for the temperature so that it can measure the data of PH accurately.Also ,we can utilize salinity tester to monitor the pH value of hydroponic plant ,we enable to adjust the quality of water once the level of pH or other parameters in irregular condition.

Salinity tester for food and drinking water/saltwater

Salinity detector for pool/drinking water can detect the salinity of freshwater.Check the salt concentration of saltwater pool and hot tub that use salt chlorine generator; Help the salt chlorinator work more efficiently in the appropriate salinity value.The acceptable daily intake of salt must not excess 6g as per the recommends from the World Health Organization,and the value of salinity of our drinks and foods should maintain less than 0.9%.Food salinity measuring range: 0.00-25.00% (you would never oversalt your food from now on )Seawater salinity is the ratio of the total dissolved solids to the weight of seawater ,usually expressed in grams per kilogram of seawater(Measuring range:10.1-200.0ppt).For saltwater pool,the ideal level of salt is 2700-3400ppm.

For saltwater hot tub/spa,the ideal level of salt is between 1900 to 3000ppm .

Electrical Conductivity( EC) Meter

Ocean waters have water electrical conductivity of about 5 mS (5000 µS), tap water has EC in the range of 250 to 900 µS, depending on the source, freshwater streams may fall in the range of 100 to 2000 µS and distilled water has EC of between 0.5 and 3 µS.Salinity and total dissolved solids (TDS) are used to calculate the EC of water.EC parameter :Range: 0-10000 µS/cm , 10.01- 19.99 mS/cm , 20.1-400.0 mS/cm (Convert range automatically)

Resolution: 1uS/cm; 0.1mS/CM;

Accuracy: ±2% F.S.

3-Point Calibration

The pH meter has been calibrated before delivery, you have no need to re-calibrate it after receiving your meter any more.We will also provide the instruction for recalibrating the meter in case you would like to use it after a quite long period .

Quickly and accurately calibrate pH meters

1. Before calibration, add pH4.00/pH6.86/pH9.18 buffer powder to a container with 250ml distilled water and stir until the powder is completely dissolved

2. Press the “ON/OFF” key to turn on the pH meter and switch to pH mode

3. Put the electrode into the pH6.18 standard solution and wait for the reading to stabilize (usually 5~10 seconds)

4. Press and hold the MODE/CAL key for 6 seconds and release it until the pH6.18 reading no longer flashes and the pH6.18. calibration is complete.

5. Repeat the above steps to complete the pH4.00/pH9.18 calibration in sequence.

NOTE: Always strictly follow the calibration sequence of pH6.18, pH4.00, pH9.18. Otherwise, the calibration result will be inaccurate.

Wide application scopes

It could be applied to wide range of domains,such as aquaculture,hydroponic plant,drinking water,swimming pools,aquariums,food processing,laboratories,paper industry,ect.

Product Dimensions ‏ : ‎ 7.2 x 1.45 x 1.45 inches; 5.29 Ounces
Item model number ‏ : ‎ EZ-9909SP
Batteries ‏ : ‎ 3 LR44 batteries required. (included)
Date First Available ‏ : ‎ June 25, 2023
Manufacturer ‏ : ‎ Norpolifomor
ASIN ‏ : ‎ B0C98T54BL
Country of Origin ‏ : ‎ China

[5-in-1 water quality meter with backlight display] TDS/pH meter can measure PH / TDS / EC / Salinity / Temperature. The measurement range is wide. Pocket-sized and multi-functional, Ideal for household salinity testing and laboratory pH testing ,or other applied scenarios,such as drinking water, swimming pool, pond, beer brewing, aquariums, hydroponics, laboratory, food processing, etc
[Dual-purpose Salinity meter] Salinity tester for water can detect the salinity of freshwater. At the same time, it enable detect the salinity of seawater. Food salinity measuring range: 0.00-25.00% ,the recommended range of food salinity must not excess 0.9% (you would never oversalt your food from now on ), while the seawater salinity measuring range:0-9999ppm,or 10.1-200.0 ppt,and the ideal reading should be 2700-3400 ppm.
[Portable water contamination tester]: Portable TDS and EC /pH tester can be carried anywhere to detect water quality of tap water, RO system water, aquarium, seawater, and pool water etc.The TDS meter reading of drinking water should not excess 150ppm ,while the normal EC reading should keep between1-4 mS/cm and the temperature of test is at 25℃ .
[PH Meter with Automatic Temperature Compensation]: Temperature can affect the data of PH, pH tester for water would be automatically making compensation for the temperature so that it could measure the value of PH accurately.The pH tester could be the replacement of pH strip which can help us to save cost too.
[Application scope]:Electronic water quality testing meter ,drinking water test kits pool water tester could be applide to wide range of scope , such as Food salinity ,Fish tank,Aquariums,Farmland,Swimming pool,Aquaculture,Laboratorier etc .